Omron B3F manual Dimensions

Dimensions

Unit: mm (inch)

■ B3F-1000/-1002/-1005/-1020*/-1022*/-1025* ■ B3F-1050/-1052/-1055

The height of the B3F-1022-G is 5±0.2 mm.

■ B3F-1100/-1102/-1105/-1120**/-1122**/-1125** ■ B3F-1150/-1052/-1055

The height of the B3F-1122-G is 5±0.2 mm.

Note: Terminal numbers are not indicated on this switch. With the switch turned over so that the logo mark “OMRON” is visible on the upper part of the rear side of the switch base, the terminal on the right of the logo mark is numbered “1” and that on the bottom right is “3.” Accordingly, two terminals on the left side are numbered “2” and “4” respectively.

Note: Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions.

■B3F-1110

Note: Terminal numbers are not indicated on this switch. With the switch turned over so that the logo mark “OMRON” is visible on the upper part of the rear side of the switch base, the terminal on the right of the logo mark is numbered “1” and that on the bottom right is “3.” Accordingly, two terminals on the left side are numbered “2” and “4” respectively.

Tactile Switch B3F 1133