Omron M4-I Maintenance and storage, Technical data, Solvents, Do not wash the cuff or make it wet

Models: M4-I

1 8
Download 8 pages 21.77 Kb
Page 6
Image 6

Maintenance and storage

For cleaning the monitor only use a soft, lightly moi-

 

stened cloth.

 

Do not use petroleum spirits, thinners or similar

 

solvents!

Stains on the cuff can be carefully removed using a

 

moist cloth and soapy water.

 

Do not wash the cuff or make it wet!

Keep your blood pressure monitor in the storage

 

case to protect it from dust and moisture.

Protect your monitor against vibrations and do not

 

leave it in a place where temperatures are extreme-

 

ly low (below -20 °C) or extremely high (above

 

60 °C) or with high humidity(+ 85%).

Do not use your monitor at very low temperatures

 

(below 10 °C) or very high temperatures (above

 

40 °C).

Do not fold the cuff or air tube together too tightly

 

and do not crease them.

Do not carry out repairs of any kind yourself.

 

If a defect occurs, consult the OMRON Customer

 

Service or seek the advice of your surgical applian-

 

ce stockist or pharmacist.

The well confirmed accuracy of this blood

 

pressure monitor is designed to last a long time.

In order to increase the lifetime of the batteries

 

take them out when you store the device for a

 

longer period than 2 months.

Electro-magnetic fields can influence the mea-

 

surement. Do not use a potable phone near this

Technical data

Model:

Display:

Blood Pressure

Measurement Range:

Accuracy:

Memory:

Inflation:

Deflation:

Pressure Detection:

Measurement Method:

Power Source:

Battery Life:

Operating Temperature:

Storage Temperature:

Humidity:

Storage humidity:

Console Weight:

Outer Dimensions:

Cuff Dimensions:

Accessories:

English

This device fulfils the provisions of the EC directive 93/42/EEC (Medical Device Directive). This blood pressure monitor is designed according to the European standard EN1060, Non-invasive sphyg- momanometers Part 1: General requirements and Part 3: Supplementary requirements for electrome- chanical blood pressure measuring systems.

OMRON M4-I

LCD digital display

Pressure: 0 mm Hg to 280 mm Hg

Pulse: 40 – 180/min.

Pressure: ±3 mm Hg

Pulse: ±5% of reading 14 measurements

Fuzzy-Logic controlled by electric pump

Automatic pressure release valve

Capacitive pressure sensor

Oscillometric method

4 Alkaline batteries 1.5V (Type LR6)

or AC/DC adapter (optional, 6V = 4W) Capacity of new batteries is approx.

300measurements 10°C to 40°C -20°C to 60°C

30to 85% RH

10to 95% RH

Approximately 450g with batteries Approximately 167.5 mm x 65 mm x 106 mm

Approximately 140 mm x 480 mm ( arm circumference 22 – 32 cm )

Cuff, Type M (CR17); instruction manual, storage case, battery set

10

unit.

NOTE: Subject to technical modification without prior notice

Disposal of this product and used batteries should be carried out in accordance with the national regulations for the disposal of electronic products.

= Type B

11

Page 6
Image 6
Omron Maintenance and storage, Technical data, Solvents, Do not wash the cuff or make it wet, Omron M4-I