Measuring your, Blood pressure, ➊ Prepare the unit

Measuring your

Air Jack

-I

SYS

mmHg

START

DIA

mmHg

PULSE

/min

Air Plug

(Connects

to the

air jack)

Open the battery compartment and insert batteries. Ensure polarity (+/-) of the batteries is correct.

Insert air tube to air jack (on the left side of the device). The cuff must be airless.

When you press the () button all the symbols on the display light up for approximately two seconds in order to check the display.

Then all the symbols disappear and the air release symbol ( ) begins to flash.

When preparations for measurement are complete the ( ) symbol appears in the display to indicate that the monitor is ready.

Image 5

Contents

M5-I M5-I Contents Dear Customer English Important instructions for obtaining meaningful readings M5-I Your blood pressure monitor the benefits Measuring your ➋ Switching on the unitBlood pressure ➊ Prepare the unit ➍ Inflating the cuff ➌ Fitting the cuff ➏ Successive readings ➐ How to use the memory function➎ The measurement starts Hints Failure, causes and rectification Do not wash the cuff or make it wet Maintenance and storageDo not use petroleum spirits, thinners or similar solvents Omron M5-I Technical data Calibration Spare parts & accessoriesOmron spare parts Some useful information about blood pressure What is Blood Pressure? Classification of Blood Pressure by World Heath Organization