3. Preparing the nebuliser for use
Warning:
Clean and disinfect the nebuliser kit, mouthpiece and optional nosepiece or masks before using them for the first time after purchase, if the device has not been used for a long period of time, or if more than one person uses the same device.
For directions on cleaning and disinfecting the parts of the device refer to Section 5 in this instruction manual.
Note: Make sure that the air filter is changed regularly. (See Section 7 “Changing the air filter”.)
1.Make sure that the power switch is turned off.
Check that the power switch is in the 
position.
2.Plug the power plug into a power outlet.
Power Plug
3. Remove the mouthpiece and cap from the nebuliser kit.
4.Remove the inhalation top from the medication tank.
1)Rotate the inhalation top
2)Lift the inhalation top out of the medication tank.
2
1
5
3
10
