![](/images/new-backgrounds/1294689/29468917x1.webp)
HOW TO APPLY THE ARM CUFF
1.If the cuff is assembled correctly, the sewn hook material will be on the outside of the cuff loop and the metal
2.Pass the end of the cuff furthest from the tubing through the metal
Smooth Cloth
Pile Material
Sewn Hook Material
3.Put your left arm through the cuff loop. The bottom of the cuff should be approximately 1/2 inch above the elbow. The cuff tab on the cuff should lie over the brachial
artery on the inside of the arm. Tube should run down center of arm even with middle finger.
1/2 inch (12.7 mm)
Cuff tab
DO NOT BLOCK THE
AIR RELEASE VALVE
NOTE: Do not block the end of the short tube which contains
a supplemental air release device that is necessary to maintain a proper deflation ratio. Blocking this tube may result
in an inaccurate reading.
9