13
PREPARING TO USE THE UNIT
1. Open cuff compartment and remove
the cuff.
2. The cuff should be assembled correctly
when it is removed from the box.If it
is not, pass the end of the cuff furthest
from the tubing through the metal D-ring
to form a loop.The smooth cloth should
be on the inside of the cuff loop.
3. If the cuff is assembled correctly, the
sewn hook material material will be on
the outside of the cuff loop and the metal
D-ring will not touch your skin.
4. Put your left arm through the cuff loop.
The bottom of the cuff should be
approximately 1/2” above the elbow.
The cuff tubing should be positioned
along the middle of the inside of your
arm as shown.
5. Pull the cuff so that the top and bottom
edges are tightened evenly around your arm.
SYSTOLIC
mmHg
DIA
STOLIC
mmHg
PULSE/min
DI
GITAL B
LOOD PR
ESSURE WITH
F
UZZY LO
GIC H
EM-7
39
START
ON/OFF
I
NTELLI
SENSE
READY TO
MEASURE
REPLACE
BATTERIE
S
Bottom Edge
1/2 Inch
Cuff Tube
Cuff Tab