TAKING A MEASUREMENT
The monitor is designed to take measurements and store the measurement values in the memory for two people using USER ID A and USER ID B.
The monitor can also be used to take a single measurement for other persons using the GUEST Mode. The USER ID symbol is not displayed when using the GUEST Mode. Measurements taken using the GUEST Mode are not stored in the memory.
CAUTION
Operate the device only as intended. Do not use the device for any other purpose.
USING THE GUEST MODE
1. Press and hold the START/STOP button.
The A and B Symbols disappear from the display.
A and B Symbols disappear
2.Release the START/STOP button. The cuff starts to inflate automatically.
NOTE: To stop the inflation press the START/STOP button. The monitor will stop inflating, start deflation and turn off.
26
