Setting up the remote
4HEREEAREETWOAWAYS TOTPROGRAMWTHIS REMOTEOTO CONTROL your devices: by entering the code directly or by searching through the codes to find the one that controls your device. Try the Direct code setup first.
Direct code setup
1.Find the code for your device in the Code list. Codes are listed by device type and brand name. The most popular code is listed first. Make sure your device is
SWITCHED ONHNOT ONOSTANDBY
2.Press the device key on this remote for the device
YOUOWISH TOISETHUP
0RESSEANDSHOLD DOWN THEO3%4DKEYDUNTILNTHET
POWER WKEYRBLINKS TWICE THEIKEYKWILL BLINK ONCE THEN TWICE
%NTERTAElVEDIGITlCODE FOR YOURIDEVICESSBRANDRUSINGD the number keys. The 
KEY BLINKSBTWICE
Note: If the 
key gives one long blink instead of two shorter blinks, you’ve entered an invalid code. Try entering a code again.
.OW AIMATHIS REMOTEIAT YOUREDEVICE AND PRESS 
POWER )FRYOUR DEVICE SWITCHES OFF THE REMOTE IS ready to operate your device.
4URNRYOUR DEVICERBACK ONVANDCTRY ALLATHEKREMOTESS FUNCTIONSTTO ENSURE THEY ARE WORKING PROPERLY)F THEHFUNCTIONSNDO NOT WORKSPROPERLY REPEAT STEPS
)F YOURYDEVICE DOESENOTIRESPOND FOLLOW STEPST TO WITH EACHHCODE LISTED FOROYOUR BRANDS)F NONE OF THEHCODESCLISTED FOR YOURSBRANDDOPERATERYOUR DEVICE OR IF YOUR BRAND ISRNOTBLISTED AT ALL TRY THE SEARCHS method described in the next section.
Important notes:
ss)F YOUR DEVICE DOES NOTORESPONDPOR IS NOTOFUNCTIONINGI PROPERLY WITHLONE OF THE CODES NTRY ANOTHERTCODE listed under your brand.
ss)F YOURYDEVICESSORIGINAL REMOTEACONTROLEDOES NOT HAVE A 0/ %2 KEY PRESSR
(play) instead of 
POWER WWHEN SETTING UPNYOUR DEVICE
ss2EMEMBER TOBPRESS THEOCORRECTEDEVICE KEY BEFOREO operating your device. Only one device can be assigned to a device key. If your original remote
OPERATES MOREETHAN ONE DEVICE YOU NEEDOTO SET UPE each device separately.
3
