One for All URC-7040 manual Search Method, Example To search for your television code

The Search Method

If your device does not respond to the ONE FOR ALL 4 after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL 4. The search method may also work if your brand is not listed at all.

Example: To search for your television code:

1Switch your television on (not in standby) and aim your ONE FOR ALL 4 at your device.

2

TV

Press the TV key on the ONE FOR ALL 4.

3

MAGIC

Press and hold down MAGIC until the ONE FOR ALL 4 red light blinks twice (the red light will blink once then twice).

4	9 9	1 Press 9 9 1. The red light will blink twice.
5	TV	Now slowly, alternate between TV and POWER, over and

over, until your television turns off. You may have to press these keys many times (up to 200 times!), so please be patient. Remember to keep pointing the ONE FOR ALL 4 at your television when you press these keys.

6

MAGIC

As soon as your television turns off, press MAGIC to store the code.

The ONE FOR ALL remote should now be ready to operate your TV. Turn your TV back on and try all the remote’s functions to ensure they are wor- king properly. If some of the ONE FOR ALL 4’s commands are not operating correctly, try the search method again. You may be using the wrong code.

Important notes:

-To search for the code for another device follow the instructions above only press the appropriate device key instead of TV during steps 2 and 5.

-If the original remote control of your VCR does not have a POWER key, press PLAY instead of POWER during step 5.

WWW.ONEFORALL.COM 7