One for All URC3050 manual URC So Easy

URC 3050

So Easy 3

Features and Functions

The illustration below and chart on the next page describe the

features and functions of the One For All® So Easy 3 Device universal remote control.

Feature	Function
RED Light (LED)	The LED flashes red to show that the
	remote is working.
	The TV, VCR and CBL keys are used to
	select the home
	entertainment device you want to control.
	The POWER key operates the same as on
	your original remote.
	The SETUP key is used to set up your
	devices.
	The Glow Keys: VOL (Volume), CH
	(Channel), and M (Mute) operate the same
	as on your original remote. To activate the
	"Glow" Feature, you must expose the
	Glow Keys to bright light. The length of
	time the Glow Keys remain illuminated
	will be determined by the length of time
	the remote is exposed to bright light.
	These keys are also used to enter set-up
	codes for your devices.
	The REW (Rewind), FF (Fast Forward),
	STOP, PLAY, PAUSE and REC (Record)
	keys control the same functions as those
	found on your VCR remote.

Thank you for purchasing the One For All® So Easy 3 Device

universal remote. Before you can use your new

remote, you will need to program it. To do this, you need to tell the remote what equipment you wish to operate. This is done by following these three easy steps.

Step 1:Install two (2) new AAA alkaline batteries.

Step 2:Look up the code for your TV, VCR or Cable Box.

Step 3: Enter the code.