Placement
For
•Placing the speaker system on several
D-407C Center Speaker
Place the
•The supporting area of the TV is larger than that of the D- 407C.
•The TV's support surface is flat and level.
•The TV is not placed on an unstable support.
Attach the circular cork pieces as slip stopper onto the bottom surface of the speaker. And you can secure the cabinet to the wall, etc. by using a durable cord with cup hooks: Find a hole on the either side of backside the speaker, and screw into each hole the cup hook of about 4 mm in diameter and 15 mm long, and then secure the speaker to the wall, etc. with the cord. Place the speaker with the sloping side up, unlike in the case when placed in lower location.
Cup hook, about 4 mm in diameter and 15 mm long
Circular cork pieces | Durable cord | Secure the | |
cabinet to | |||
|
| ||
|
| the wall, etc. |
Attaching and detaching the speaker grilles
This speaker system uses detachable grilles. Use the following method to attach or detach the grilles.
1.While holding the left (or right) side edge of the speaker grille with your both hands, pull it gently toward you to remove the bottom of the grille.
2.In the same way, gently pull the right (or left) side edge of the speaker grille toward you to remove it from the main unit.
3.To replace the grill, push the projections at the corners into the grille plug holes on the speaker cabinet.
2
1To detach the speaker grille, pull it gently at the left and right side edge.
Use with a TV set
In general, Braun tubes used for color television sets, etc. are extremely sensitive and can be affected even by the magnetism of the earth. If a speaker system is used near them, therefore, discoloration or distortion of pictures will occur. To allow use with color television sets, etc., this speaker system is provided with magnetic shielding.
Even so, discoloration may still result, depending on the installation environment. If discoloration occurs, turn off the power of the television set, wait for 15 to 30 minutes and then turn it on again. This activates the
Speaker care
Your Onkyo speakers are finished with a high quality covering that serves to protect the wood speaker cabinet.
Wipe the cabinet periodically with a dry,
The covering may be cleaned with a soft cloth moistened with water and a mild soap. Avoid the use of furniture polishes or harsh cleansers. Use a soft brush or hand vacuum cleaner to remove dust and lint from the grille material.
Natural wood finished cabinets
The cabinets are finished with a natural wood surface. They have a unique wood grain pattern. Your cabinets have their own raw beauty and uniqueness which is unlocked from the tree; this is depicted by the