Adjusting Audio and Video Settings
The procedure on this page describes how to operate the menus on the Setup screen. These menus are used to set and adjust a number of system settings. The various functions that can be adjusted are covered throughout this manual. The procedure on this page provides a basic outline for using the Setup screen menus.
Using the Setup Screen Menus
1 | ON | Press ON (STANDBY/ON on the |
| ||
| front panel). |
2 | SETUP | Press SETUP. |
|
| |
|
| The Setup screen appears. |
|
| Example |
3 | Use the cursor buttons (2/3) to |
| select the menu you want. |
| As each menu is selected with the cursor, |
| the settings appear below the menu |
| heading. |
|
|
4 | Use the cursor buttons (∞) to enter |
the menu. |
6 | Use the cursor buttons (3) to enter |
the setting options. |
Example
•Not all menu options can be changed while a disc is playing. In these cases, the options appear grayed out on the screen and cannot be adjusted. To change these settings, press 7 first before pressing SETUP.
•Operating the menu after pressing 7 may cancel the resume function.
•Some menu options are not immediately effective if set while a disc is playing. To make these settings effective, stop playback and then start again, or change the settings while the disc is stopped.
The top item within the menu becomes highlighted.
Example
7
ENTER
Use the cursor buttons (5/∞) to select a new setting and press ENTER to set the new setting in memory.
Press RETURN or the cursor button (2) to exit the options without making any changes.
5 | Use the cursor buttons (5/∞) to |
select the setting you want to |
change.
The options available for each setting appear to the right when the setting is selected. The current setting appears with the setting indicator lit.
38
8 | RETURN | Press RETURN or the cursor button |
| ||
| (2) to go back to the main menu bar |
to select another menu.
9 | SETUP |
Press SETUP to close the Setup | |
screen. |
The Setup screen closes.
Notes
•If you turn off the DVD player during setup, the settings are canceled. Press SETUP to finish the setup.
•The memorized resume position may be erased by setup.
•The Setup screen always shows the latest settings.