Onkyo instruction manual Connecting the Power/Turning on the DV-SP405, North American model

DV-SP405_En.book Page 24 Tuesday, May 29, 2007 2:48 PM

Connecting the Power/Turning on the DV-SP405

Before connecting

•Make sure that all the connections on pages 18–23 are complete (the connection to a TV is required).

STANDBY/ON

ON	ON STANDBY
	OPEN/
	CLOSE

PLAY

MODE

1 2 3

DISPLAY

4 5 6

7 8 9

0CLEAR

TOP MENU	MENU
ENTER
RETURN	HOME
	MENU
AUDIO ANGLE SUBTITLE	ZOOM
USB/DVD

1	North American model:
	Connect the power cord into the
	power outlet on the wall.

Oceanian and European model: Plug the supplied power cord into the AC INLET and then into the power outlet on the wall.

•Do not use a power cord other than the one supplied with the DV-SP405. The power cord supplied is designed for use with the DV-SP405 and should not be used with any other device.

•Never have the power cord discon- nected from the DV-SP405 while the other end is plugged into the wall out- let. Doing so may cause an electric shock. Always connect by plugging into the wall outlet last and disconnect by unplugging from the wall outlet first.

To a wall outlet

RC-699DV

2

Remote

controller

ON

Press STANDBY/ON on the DV-SP405 or ON on the remote controller.

The DVD Player turns on.

•To put the DV-SP405 in the standby mode, press STANDBY/ON on the DV-SP405, or STANDBY on the remote controller. Be sure to set the volume on the amplifier to minimum before putting the DV-SP405 in the standby mode for the next use to avoid sudden loud sound reproduction.

•Setting the STANDBY/ON button to standby does not shut off the power completely.

Note:

•This player features a screen saver and an auto power off function. If the player is stopped and no button is pressed for five minutes, the screen saver starts. If the disc tray is closed but no disc is playing and no control is pressed for 30 minutes, the player automatically goes into standby.

24