Onkyo DV-SP506 If There’s No Sound via Hdmi Using Rihd, About RIHD-compatible Components

If There’s No Sound via HDMI...

By default, the HDMI Audio Out setting is set to Auto so that audio is automatically output in a format that suits the con- nected HDMI component. However, if there’s no sound, you will need to change the HDMI Audio Out setting. See pages 24–26 or page 51 of the DV-SP506 Instruction Manual for details.

Using RIHD

To use RIHD, make sure CEC is enabled on your other CEC-compatible AV components (e.g., TV or AV receiver). On the DV-SP506, make sure the HDMI Control, Power Control, and Direct Change settings are all set to On.

About RIHD-compatible Components

The TVs listed below (in no particular order) are compatible with RIHD.

•Panasonic TVs that support VIERA LINK

•Toshiba TVs that support REGZA-LINK

Components other than those listed here may also provide linked operation if they support the CEC part of the HDMI standard, however, operation cannot be guaranteed.

Displaying Message IDs when Troubleshooting HDMI Issues

DV-SP506You can check the status of the HDMI connection by pressing and holding down the DV-SP506’s [DIS-

PLAY] button for 10 seconds until a message ID appears on the display. Look up the message ID in the

following tables and check the HDMI connections and settings on both the DV-SP506 and the connected component. The page numbers in parentheses refer to the DV-SP506 Instruction Manual.

HDMI connection and HDMI-related settings status

Displayed ID	Message
MSG ID 001	Turn the DV-SP506 and the connected component off, then turn them on again. Make sure that the connected
MSG ID 005	component is working properly and that the DV-SP506’s HDMI settings are configured suitably for that compo-
MSG ID 015	nent.
No picture from the HDMI connection
Displayed ID	Message
MSG ID 002	The HDMI Output Setting is set to Off. Change it to On (page 46).
MSG ID 003	The HDMI cable may not be connected properly. Check the connection. Also, make sure the HDMI input on the
MSG ID 004	TV or AV receiver is correctly configured to received HDMI.
	Make sure the HDMI input on the TV or AV receiver is correctly configured to received HDMI.
MSG ID 005	The connected component may not support HDCP. Make sure the connected component supports HDCP.
MSG ID 006	Turn the DV-SP506 and the connected component off, then turn them on again.
MSG ID 007	The DV-SP506 may be connected to the other component’s DVI jack. Some TVs may not properly receive the
	video output by the DV-SP506. Also, with a DVI connection, there will be no sound.
MSG ID 008	The DV-SP506’s HD Resolution setting is set to 480i/576i, 720p, 1080i, or 1080p. If your TV doesn’t support
	these resolutions, select another resolution (page 46).
MSG ID 009	The connected component may not be receiving the HDMI signal properly.
	Check the settings on the connected component.
No sound from the HDMI connection
Displayed ID	Message
MSG ID 009	The connected component may not be receiving the HDMI signal properly.
	Check the settings on the connected component.
MSG ID 010	The DV-SP506’s HDMI Audio Out setting is set to Off. Change the setting to Auto, 6ch DSD, 6ch PCM, or 2ch
MSG ID 021	PCM (page 51).
MSG ID 012	The connected component may not support Dolby Digital. Set the DV-SP506’s HDMI Audio Out setting to Auto
MSG ID 013	or 2ch PCM (page 51).
MSG ID 016	The connected component may not support DTS. Set the DV-SP506’s HDMI Audio Out setting to Auto or 2ch
MSG ID 017	PCM (page 51).
MSG ID 020	When playing an SACD or DVD-Audio disc, the HDMI Audio Out setting is set to 6ch DSD, 6ch PCM, or Off, but
	your AV receiver or TV does not support these audio formats. Change the setting to Auto or 2ch PCM.

For more information, refer to the manuals for the DV-SP506 and the other component.

En-2