Onkyo ED-901 Connections, VIDEO-4IN, VIDEO-1IN, TX-SV919THX, TX-SV828THX, receiver

Connections

·Do not plug in the power cord until all connections have been made.

·Before connecting the ED-901 to the receiver, make sure that the POWER switches on both the ED-901 and the receiver are in the OFF position.

·On each pair of input jacks, the lower jack (marked R: Red) corresponds to the right channel and the upper jack (marked L: White) to the left channel.

·Be sure to read the Receiver Instruction Manual in addition to this manual.

For connection to the Onkyo TX-SV919THX surround

receiver...

·Connect the other end of the video cable (supplied) to the VIDEO-4 IN terminal of the TX-SV919THX.

·On the TX-SV919THX, set the External Decoder mode to “ON”.

See the “Setting External Decoder Parameter” section (page 55) of the TX-SV919THX Manual and set the parameters set by "Level Calibration (TEST TONE)..."(page 33), because External decoder parameters are able to be set independently from THX mode parameters.

For connection to the Onkyo TX-SV828THX surround

receiver...

·Connect the other end of the video cable (supplied) to the VIDEO-1 IN terminal of the TX-SV828THX.

·Read “AC-3 decoder connection” in the “Optical pre- amplifier connections” section of the TX-SV828THX Manual.

·On the TX-SV828THX, select “External Decoder” in the Surround Setup menu. See Fig. 4 in the “Operating Sur- round” section (page 42) of the TX-SV828THX Manual.

VDP DVD

Note:
VDP with AC-3RF output is	S video Audio		Video
required for AC-3 reproduction.
	OUT	out	OUT
AC-3RF		L R

ED-901

2	INPUT 1
	(VDP)
COAXIAL	AC-3 RF

MULTI-CHANNEL AUDIO OUTPUT

COAXIAL OPTICAL DB-25

	DB-25 cable
	(included)
	Note:	S cable
	Fasten the screws	(option)
	with a screwdriver
	to secure
	the connections.
R L VideoS-Video	External decorder input
VIDEO-4
IN
	S
	VIDEO-1
External	IN
	V
decorder	IN
input	L
	R
	VIDEO-1
VIDEO-4 IN	VIDEO-1 IN
(TX-SV919THX)	(TX-SV828THX)

S video		Audio
OpticalOUTVideo
OUT	OUT	out
		L R

Coaxial

OUT

					Plug in the AC
OUTPUT INPUT INPUT 2	OUTPUT INPUT INPUT 2				power cord to a
S-VIDEO	VIDEO	DOLBY SURROUND AC-3 DECODER			wall outlet if
		MODEL NO. ED-901
		RATING:			you have
		AC120V	60Hz	25W
L		ONKYO CORPORATION
		2-1,NISSHIN-CHO,NEYAGAWA-SHI,OSAKA,			connected all the
AUDIO		JAPAN	MADE IN JAPAN
R
					other cables.
Audio cable	Video cable
(included)	(included)

TX-SV828THX or TX-SV919THX

8