TX-NR5000E THXUltra2Certified 7.1-Channel A/V Home Network Receiver

(April Issue 2005)

SILVER BLACK

The lesser-used controls are neatly tucked away behind the drop-down panel.

As Onkyo’s only module-based home network receiver, the THX Ultra2 certified TX-NR5000E gives you the freedom to configure your home theater exactly as you wish. It’s also the most powerful Onkyo receiver ever built, courtesy of its massive shielded toroidal transformer and high-capacity, low- ESR filter capacitors.That’s enough power to drive a large home theater connected to multiple A/V sources with an advanced display or projector.You can even assign 7.1-channel set-ups in two different rooms for two independent home theater environments. HDMI and i.LINK ports carry high- resolution, high-bandwidth digital video and audio signals.These transports are ably supported by digital and multichannel analog inputs to handle all surround sound formats, including Dolby® True HD and DTS-HD®Master Audio. Also, an Ethernet port enables Onkyo’s exclusive Net-Tune client processor to distribute digital music files on your PC—or internet radio—to up to 11 clients on the same network.

250 W/Ch, Continuous 6 , 1 kHz, 1 Channel Driven, IEC

THXUltra2Certified (with THX Processing)

THXSurround EX, DTS®-ESDiscrete/Matrix, DTS® Neo:6, DTS® 96/24, Dolby® Digital EX, Dolby® Pro Logic® IIx, Dolby® Headphone, Dolby® Virtual Speaker

VLSC (Vector Linear Shaping Circuitry)

WRAT (Wide Range Amplifier Technology)

Net-TuneFunction with MP3/WMA/WAV Playback

Ethernet Cable Plug-in Capability*

2 HDMI Inputs and 1 Output

4 Component Video Inputs (3 RCA/1 BNC) and

2 Outputs (RCA/BNC)

HDMI and Component Video Upconversion

Time Base Corrector (TBC) for Upconversion

HDTV-Capable HDMI and Component Video Switching (100 MHz)

2 i.LINK Digital Ports

Speaker A and B Mode for 7.1 Channels

BTL and Bi-Wiring Connectable for FL/FR with SBL/SBR

Dual 32-Bit Processing DSP Chips

192 kHz/24-Bit DACs for All Channels

Powered Zone 2 and Zone 3 (Audio and Video)

5 12V Trigger Outputs and 3 IR Inputs and Outputs

Bi-Directional RS232 Port for Interface Control

2 Sets of Color-Coded Heavy-Duty Dual Banana Plug- Compatible Transparent Speaker Posts

Color-Coded 7.1 Multichannel Inputs (Receive 7.1 Surround Sound from Compatible Blu-ray Disc and HD DVD Players) and Pre Outs

A/V Sync Control Function (Up to 300 ms)

Elegant Aluminum-Faced RI (Remote Interactive) Remote Control with Scroll Wheel and LCD Display

*For copyright protection purposes, it is not possible to make a digital output signal from Ethernet input signals.

RF-EX6RF Receiver for TX-NR5000E

RF Receiver for Use with Onkyo RF-Capable Remote Controller

Allows Your RF Remote to Control Your Devices by Radio Frequency

Up to 16 Units in One System

Integrated IR-Blaster

4 Outputs for IR-Emitters

Range up to 30 m

4 Selectable Channels

Easy Installation

For Top Mounting and Stand Alone

6

Home Theater Components

Page 6
Image 6
Onkyo Home Entertainment System manual RF-EX6RF Receiver for TX-NR5000E