Connecting to the ONKYO Separate Collection Series components

Connecting to the audio connector

Before connecting

•Do not connect the unit’s AC power cord (mains lead) to a wall outlet (the mains) until you have completed all the other connections, including and AC OUTLET connections on page 10. Refer to “Connecting to components other than the Separate Collection Series” on page 11 and “Connect- ing speaker systems” on page 14.

•On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a white connector (marked L) to the left channel. Connect white plugs of audio cables to L connectors and connect red plugs of audio cables to R connectors.

To L connector

(White)

Audio connection cable

 

(White)

To L connector

To R connector

(Red)

(Red)

To R connector

•Please refer to the instruction manual for each component when you make any connections.

•Insert the plug securely. If the connection is incomplete, noise or malfunction may result.

Improper connection

Insert completely

•When you use a digital audio optical cable, do not bend it sharply nor coil it tightly.

•Bundling an audio connection cable with the power cord or speaker cord may degrade the sound quality.

•Be sure to use the with each component (not supplied with the A-905X) to connect to the remote control jack. If the connection is incomplete, you will be unable to operate the device using the remote controller.

•CD players and MD recorders use heat-sensitive parts. Do not place them on top of the amplifier.

Note:

To connect both the MD recorder MD-105X and stereo cassette tape deck K-505X to the unit

Connect the MD recorder to the unit following the “Connections for combination example 2” on the next page and connect the stereo cassette tape deck to the unit following the “Connections for combination example 1.”

8