Onkyo SKF-4700 Placement, Speaker care, Specifications, When using as a Surround Back Speaker

Placement

For better-quality sound, observe the following precautions when you install the speaker system:

●Placing the speaker system on several small-diameter supports generally results in better sound than placing it directly on a wide installation surface.Also note that high quality bass cannot be obtained if the speaker system is unstably positioned.Always use thin discs of cork or metal (such as coins) to seat the speaker stably.

●Place the Right and Left surround speakers in similar conditions. If they are placed in extremely different conditions, left right channel balance will be adversely affected.

When using as a Surround Back Speaker

It is very important to place your speakers properly to obtain the optimum sound space for your listening pleasure.

The surround back speaker is required for enjoying 6.1ch / 7.1ch surround sound. The surround back speaker will also improve the quality of sound effects for far more realistic acoustics.

Place the speaker so that its height is 1 meter higher than that of the listener's ears.

		Sub-
		woofer
	TV or Screen
left	Center	Front	right
Front	speaker
speaker
		speaker
Surround	Listener	Surround
left		right
speaker		speaker
	Surround
	back
	speaker

If the speaker is to be wall-mounted, make sure that the walls are strong enough to support the speaker’s weight. The weight that mounting screws can support varies greatly depending on the wall material and the position of the reinforcing ribs embedded in the wall. Use the thickest and longest possible mounting screws with mounting screw head diameters less than 9 mm and shank diameters less than 4 mm (please consult with your interior designer or contractor).

Using spacers

Affix four of the supplied spacers to the SKR-4700.

• Mounting on a wall

Wall bracket

Spacer	Bottom of the
	SKR-4700

Spacer

Speaker care

Your Onkyo speaker is finished with a very high quality polymer laminate covering that serves to protect the wood speaker cabinet. Wipe the cabinet periodically with a dry, silicon-embedded or plain soft cloth.

The covering may be cleaned with a soft cloth moistened with water and a mild soap. Avoid the use of furniture polishes or harsh cleansers.

Use a soft brush or hand vacuum cleaner to remove dust and lint from the grille material.

	Specifications
Type:	2-way bass reflex
Impedance:	8 Ω
Maximum input power:	130 W
Output sound pressure level: 81 dB/W/m
Frequency response:	50 Hz - 50 kHz
Crossover frequency:	6 kHz
Cabinet capacity:	4 L
Speaker (woofer):	10 cm cone
Speaker (tweeter):	2.5 cm balanced dome
Dimensions:	155 (W) x 266 (H) x 140 (D) mm
	(Overall dimensions)
Weight:	1.8 kg
Others:	Magnetic shielding
Accessory:	9 m speaker cable
	Instruction manual
	Spacer x 4

Specifications and appearance may subject to change for improvement without prior notice.