Connections

•Be sure to turn off your amplifier before connecting the speaker system. Connecting it while the amplifier is on may result in damage to the amplifier or the speaker system.

•The nominal impedance of this speaker system is 8Ω. Use only amplifiers capable of handling this imped- ance.

•Use the supplied speaker cables to connect between the speaker’s input terminals and the amplifier’s speaker terminals as illustrated below.

•Be sure to connect the Center, Surround Right and Left speakers with the amplifier’s corresponding speaker terminals. Also, be sure that you are connect- ing the speaker’s positive (+) and negative (–) input terminals with the amplifier’s corresponding positive and negative speaker terminals. Otherwise, undesir- able sound field or impaired bass-range reproduction will result.

•Before turning on the amplifier’s power switch, pull lightly on the speaker cables to ensure that they are connected securely.

•To prevent damage to cir- cuitry, never short-circuit the

positive (+) and negative (–) speaker wire.

SKF-3600

 

 

SKF-3600

Front right

 

 

Front left

speaker

 

 

speaker

 

SKC-3600

 

Center speaker

 

 

 

Green

 

 

FRONT

 

 

SURROUND

CENTER

SPEAKERS

 

B

SPEAKERS

SPEAKER

A

 

 

Blue

L

L

L

 

 

 

 

R

 

 

 

R

 

R

 

 

 

 

 

 

SURROUND BACK

 

 

 

 

SPEAKER

Gray

 

 

 

SKM-3600

 

SKM-3600

Surround right

Surround left

speaker

 

 

speaker

 

1. Strip the insulation of speaker cables, and twist the core wires tightly.

2. While pressing the lever, insert the wire into the hole, and then release the lever.

3. Make sure that the terminals are gripping the core wires, not the insulation.

Installation using commercially- available stands and fixtures

The surround speaker bottom and rear are equipped with screw holes so that you can attach commercially- available stands or mounting fixtures for a variety of mounting options. (Two M5 screw holes, 60 mm pitch on the bottom and one M5 screw hole on the rear.)

Note:

 

 

When attaching an

5 mm

 

accessory item to a

 

 

 

speaker, be careful

7

~ 12 mm

of the length of the

 

 

screws used. Use

M5 screw

 

only screws that

 

 

 

provide the required strength with a screw length between 7 and 12 mm.

Precaution on use

•This speaker system can handle the specified input power when it is used for ordinary music reproduc- tion. If the following abnormal signals are fed to the speaker, however, an overcurrent may flow in the internal circuits, causing burning or breakage of the wires even if the input power is below the specified rating.

1.Noise produced when FM station is not tuned in

2.Sound produced when fast-forwarding cassette tape deck

3.High-frequency sound generated by an oscillator, an electronic musical instruments, etc.

4.Oscillating amplifier signals

5.Special test signals produced by audio checking CD, etc.

6.Sound produced when connecting or disconnect- ing audio connection cables (Always turn off the amplifier’s power before connecting or discon- necting cables.)

7.Howling when a microphone is used

•Do not place magnetic objects such as screwdrivers and iron parts near the speaker system since they use speakers with strong magnets. Otherwise, the objects may be attracted, causing injury or damaging the dia- phragm.

3

Page 2 Page 4
Page 3
Image 3
Onkyo SKM-3600 instruction manual Connections, Precaution on use
Page 2 Page 4

SKM-3600 specifications

The Onkyo SKM-3600 is a versatile and high-performance speaker system designed to deliver exceptional sound quality for home audio enthusiasts. Known for its innovative technologies and user-friendly features, the SKM-3600 has gained popularity for its ability to enhance both music listening and home theater experiences.

One of the standout features of the SKM-3600 is its advanced driver configuration. The system typically includes a combination of woofers and tweeters that work in harmony to produce a well-balanced sound profile. The woofers handle low frequencies, ensuring deep bass that adds richness to music and cinematic soundtracks. The tweeters, on the other hand, are responsible for high frequencies, providing crisp and clear treble that enhances vocal clarity and instrument detail.

An important technology utilized in the SKM-3600 is the proprietary Onkyo sound tuning. This technology optimizes audio performance by adjusting the speaker’s frequency response to better suit the acoustics of the room in which it is placed. This ensures that users experience a consistent and enjoyable sound no matter where they sit.

The SKM-3600 also features a robust build quality, with well-engineered cabinets that reduce resonance and unwanted vibrations. This design not only contributes to improved sound fidelity but also ensures durability, making the speakers a long-lasting addition to any audio setup.

Connectivity options are another key aspect of the SKM-3600. The speakers are compatible with a variety of audio devices, including receivers and televisions, making them versatile for different setups. Some models may offer wireless connectivity features, allowing for easy pairing with smartphones and tablets, streamlining the process of playing music or watching movies.

In addition to audio performance, aesthetic appeal is often a consideration for users, and the SKM-3600 design does not disappoint. With a sleek and modern look, these speakers can seamlessly blend into any home décor, adding a touch of elegance to the entertainment space.

Overall, the Onkyo SKM-3600 is a standout choice for those seeking a premium audio experience. Its combination of advanced technology, robust construction, and attractive design makes it an excellent addition to any home audio system, ensuring that users enjoy their favorite music and films to the fullest. Whether for casual listening or immersive movie nights, the SKM-3600 aims to impress with its sound quality and versatility.
Top Page Image Contents