Input Setup

RETURN

MENU

/ //

Input source buttons

RETURN SETUP

/ //

ENTER

INPUT SELECTOR buttons

This menu allows you to make the various settings concerning the signals input from the various input sources that you use with the TX-SR700/700E/600/600E. The settings made in this menu are valid for the input source that is currently selected with the input source buttons at the front panel and, therefore, these settings are made separately for each input source.

Setup Procedure

1. Select the desired input source.

2.Press the MENU button on the front panel or SETUP button on the remote controller.

The main menu appears.

* Menu *****************

1.Speaker Config 2.Speaker Distance 3.Level Calibration

4.Input Setup

5.OSD Setup 6.Preference

ENTERQuit:SETUP

3.Use the and cursor buttons to select “4. Input Setup” and then press the ENTER button.

The “Input Setup” menu appears.

4.Use the and cursor buttons to select an item and then use the and cursor buttons to set the desired value.

Press the RETURN button to return to the main menu.

Press the MENU button on the front panel or SETUP button on the remote controller to exit the Setup menu.

a. Digital Input

This setting tells the TX-SR700/700E/600/600E which input source button on the front panel is connected with which digital input jack on the rear panel.

For example, if the input source selected at the front panel is CD and the compact disc player is connected to DIGITAL INPUT OPTICAL 2, then select “OPT2” here. If the input source selected is not connected to a digital input, then select “----.”

OPT1, 2: Select if the input source is connected to either of the DIGITAL INPUT OPTICAL 1 or 2 jack.

COAX: Select if the input source is connected to the DIGITAL INPUT COAXIAL jack.

–– – –:Select if the input source is not from a digital input jack. The default settings are given below.

Input source

Digital input

 

 

CD

OPT 1

 

 

PHONO*

----

 

 

TAPE

----

 

 

DVD

COAX

 

 

VIDEO 1

----

 

 

VIDEO 2

----

 

 

VIDEO 3

OPT 2

----: Available for digital input but not set in initial settings. * TX-SR700/700E only

Notes:

* Menu *****************

1.Speaker Config 4.Input Setup 2.Speaker Distance

*** Input:DVD *******

3.Level Calibration

4.Input Setup a.Digital Input :COAX

5.OSD Setup b.Digital Format:All

6.Preference c.Multichannel :Yes

d.Component Video :Input1

e.IntelliVolume

: 0dB

Quit:SETUP

* Menu *****************

1.Speaker Config 4.Input Setup 2.Speaker Distance

*** Input:DVD *******

3.Level Calibration

4.Input Setup f.Analog/PCM Source

5.OSD Setup :Stereo

6.Preference

g.PCM fs96kHz Source :Stereo

h.Digital Format Source :Surround

Quit:SETUP

•This item will not appear if the selected input source button is

TUNER.

•Since VIDEO 4 is fixed to the optical digital terminal on the front panel, this item will not appear if VIDEO 4 is selected.

53