Front panel facilities

For further operational instructions, see the pages indicated in

FM MODE button [40]

 

 

 

 

brackets [ ].

Press to change the stereo mode from AUTO to MONO and vice

 

 

 

 

 

 

 

POWER switch (for all models other than USA and

versa. Each time this button is pressed, the AUTO indication turns

on and off indicating the current mode. If you are listening to an FM

Canadian models) [33]

radio station in stereo and the sound cuts out or there is a great deal of

Press to turn on and off the main power supply for the TX-SR700/

noise, switch from AUTO to MONO.

 

 

 

 

700E/600/600E. When the TX-SR700/700E/600/600E is turned on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

with the POWER switch, the STANDBY indicator lights.

Remote control sensor [7]

 

 

 

 

• Before turning on the power, check to make sure that all cords

 

 

 

 

 

 

 

 

 

 

 

 

 

 

are properly connected.

AUDIO ADJUST button [57]

 

 

 

 

• When the power is turned on, a sudden surge of current will

 

 

 

 

Press to adjust the sound quality and the listening mode.

occur that may adversely affect the operation of other devices.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To prevent this, do not plug the TX-SR700/700E/600/600E into

MENU button [36]

 

 

 

 

the same circuit used by sensitive equipment, e.g., computers.

 

 

 

 

 

 

 

 

 

 

 

Press to enter the Setup Menu. The OSD Menu will appear on the TV

STANDBY/ON button [33]

monitor as well as the front display on the TX-SR700/700E/600/

If pressed with the POWER switch turned on (with the receiver

600E.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

plugged in for US models), the TX-SR700/700E/600/600E turns on

RETURN button [36]

 

 

 

 

and the display lights up. If pressed again, the TX-SR700/700E/600/

 

 

 

 

600E returns to the standby state. In the standby state, the display is

When in the Setup Menu, press to go back one level. If pressed while

turned off and the TX-SR700/700E/600/600E cannot be operated.

at the Main Menu, you will exit the Setup Menu.

 

 

 

 

STANDBY indicator [7, 33]

TUNING

/

, PRESET / , cursor

( / / / )

Lights when the TX-SR700/700E/600/600E is in the standby state

buttons [36, 40, 41]

 

 

 

 

and when a signal is received from the remote controller.

To tune into a radio station, press the TUNING

/

buttons. The

 

 

 

 

 

 

 

tuner frequency is displayed in the front display and it can be changed

DISPLAY button [48]

in 50-kHz increments for FM and 10-kHz (or 9-kHz) increments for

Press to display information about the current input source signal.

AM.

 

 

 

 

 

 

 

 

 

 

 

 

 

When FM is selected as the input source, you can hold down either

Each time you press the display button, the screen changes to show

the TUNING or

button and then release it to activate the auto-

you different information concerning the input signal.

search feature. It will search for a station in the direction of the

 

 

 

 

 

 

 

RT/PTY/TP (European models only) button [43]

button you pressed and stop when it tunes into one. When navigating

through the menu settings, these buttons move the cursor up or down

This button is only available on European models. Press this button

(or change the highlighted item).

 

 

 

 

to tune into the Radio Data System (RDS) for FM broadcasting. RDS

To select a radio station that was stored using the MEMORY button,

was developed within the European Broadcasting Union (EBU) and

press the PRESET

/

buttons.

 

 

 

 

is available in most European countries. Each time the button is

When navigating through the menu settings, these buttons select the

pressed, the display changes from RT (radio text) to PTY (program

value or item that you selected with the TUNING

/

buttons.

type) to TP (traffic program) and then back to RT again.

When you press the MENU button, the TUNING and PRESET

 

 

 

 

 

 

 

buttons become cursor buttons to be used for Setup Menu

DIMMER button

operations.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press to set the brightness of the front

ENTER button [36]

 

 

 

 

display. There are 3 settings available:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

normal, dark, and very dark.

 

 

 

 

Press to display the screen for the item that is selected in the Setup

 

 

 

 

 

 

 

 

 

 

Menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

• The brightness of the front display can

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

also be performed using the remote

 

 

 

 

 

 

MASTER VOLUME dial [44, 45]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

controller.

 

 

 

 

 

 

 

 

 

 

 

TX-SR600/600E:

 

 

 

 

 

 

 

 

 

 

 

 

 

LISTENING MODE buttons [49-51]

Use to control the volume.

 

 

 

 

Press these buttons to select a listening mode for the current input

TX-SR700/700E:

 

 

 

 

 

 

 

 

 

 

 

 

 

Use to control the volume in the main zone. The volume for the

source. Press the DIRECT, STEREO, and SURROUND buttons to

remote zone (Zone 2) is independent.

 

 

 

 

select a listening mode directly. Press the DSP button to select any of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the possible listening modes for the input source currently selected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:

VIDEO 4 INPUT terminals [21, 28]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

During playback of a multichannel source, press the DIRECT button

For connecting a video camera or game device.

 

 

 

 

to turn off the tone control and the SURROUND button to turn on

The VIDEO 4 INPUT (DIGITAL)

 

 

 

 

 

the tone control. [48]

jack is provided with a protective

 

 

 

 

 

 

 

 

 

 

 

cap. When using this jack, remove

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Front display

the protective cap and keep it

 

 

 

 

safely. When not using this jack,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MEMORY button [41]

replace the protective cap.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press to assign the radio station that you are currently tuned into to a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Protective cap

 

 

 

 

preset channel or press to delete a previously preset station.

 

 

 

 

 

 

9