Remote controller
SEND/LEARN indicator
Lights red when signals are sent by the remote controller. It also flashes when a button is pressed when the battery power is low.
ON/STANDBY button [33]
ON: Press to turn on the
STANDBY: Press to place the
Be aware that pressing the STANDBY button only places the TX- SR700/700E/600/600E in standby and does not turn the power completely off.
SLEEP button [47]
Press to set the sleep function.
The SLEEP button enables you to set the
MACRO 1, 2 button [73]
Press to program or execute the macro function.
MODE buttons and indicators [44, 45,
Press to select the component to be operated by the remote controller. When a MODE button is pressed, it will light green (RC- 482M) or red
RETURN button [36]
Press to enter the selected setting and return to the previous menu.
CH 
, DISC 
button
Press to select a preset channel for the tuner (CH). [41]
When the CD mode is selected, also press to select a disc when operating components with disc changers (DISC). [64]
CH SEL/TOP MENU button
Press to select a speaker channel when adjusting the speaker level (CH SEL). [39]
When the DVD mode is selected, press to display the menu screens of the DVD player (TOP MENU). [65]
AUDIO SEL/TV/VCR button [47]
Press to select the audio input signal. The setting changes from “Auto” to “Multich” (only if DVD is selected as the input source) to “Analog” and back each time this button is pressed.
LEVEL 
/ANGLE and LEVEL 
/SUBTITLE buttons
Press to adjust the volume of the speaker selected using the CH SEL button (LEVEL 
/
). [39]
Press the ANGLE button to select a camera angle when playing a
Press the SUBTITLE button to select a subtitle language when playing a
CD/TAPE/DVD/MD operation buttons
Press to operate other Onkyo components connected to the TX-
SR700/700E/600/600E using the 
terminals.
12