SETUP MENU OPTIONS
65
level audio more audible during low-level listening. Turning off DRC restores the sonic energy
present in the original recording. The available options are:
• Auto – Play at the dynamic range specified by the disc. This option applies to Blu-ray
Discs only. For other disc types no dynamic range compression is applied.
• On – Turn on dynamic range compression.
• Off – Turn off dynamic range compression.
Device Setup
The “Device Setup” section of the Setup Menu system allows you to configure additional player options related
to the hardware and control functions. The menu items in this section are:
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Dimmer Control
OSD Mode
Remote Control Code
HDMI CEC
Persistent Storage
Reset Factory Defaults
Firmware Information
On
Normal
Code 1
On
Setup Menu
Exit
Dim front panel display
1. Dimmer Control: To control the display intensity of the front panel Vacuum Fluorescent Display
(VFD) information window. In case you feel that the display becomes a distraction to your
enjoyment of the video, this option allows you to dim it or turn it off. The available options are:
• On - The VFD window is at normal brightness.
• Dim - The VFD window is at reduced brightness.
• Off – The VFD window is turned off. In this mode the display resumes momentarily when
there is any user operation.
2. OSD Mode: To select how long the on-screen display information, such as elapsed or remaining
time, stays on the TV screen. The available options are:
• Normal – On-screen display information stays on the TV screen until the user cancels it.
• Silent – On-screen display information shows on the TV screen for a few seconds and then
disappears. The front panel display still maintains the selected display information.
• Remaining – On-screen display information stays on the TV screen until the user cancels
it. By default display remaining time instead of elapsed time.
3. Remote Control Code: The OPPO BDP-83 Blu-ray Disc Player can respond to one of 4 sets of
remote control codes. The default is “Code 1”. If you have other OPPO products placed close to the
BDP-83, the other products may respond to the BDP-83 remote control. In this case you can select
a different remote code to avoid conflicts. The available codes are:
• Code 1 – OPPO disc player remote code set 1. This is the default remote code.
• Code 2 – OPPO disc player remote code set 2. Use this code if you have other OPPO
products placed close to the BDP-83.