Discovery
The discovery method is a more automated method. The bar code data collector will try to discover all Bluetooth devices in range (up to a maximum of 10 devices).
The address and the name of each Bluetooth device is shown one by one in the display.
Navigate downwards by the right key [Q2] and navigate upwards by the left key [Q1].
When device that should be used for communication is found, select it by the middle [Trigger]key.
2.5.2 SECURITY
To provide additional security connections, the Bluetooth specification allows you to enable a special security setting, so that a
If you want to use 'unsecured' connections, do not set the
Start the system menu.
Select option Input
Select option Input
Set
The code shown is either ……………., or the code that was
entered before.
The
The digits of the address can be selected one by one by the block marker.
Change the digit by pressing the left key [Q1]. Every time the left key [Q1] is pressed the value of the digit is going up with one numeric value. When the proper value is displayed move the marker to the next digit with the right key [Q2]. When the setting of the code is done, confirm by the middle [Trigger]key.
Delete
The
OPL972X/CRD972X OPTICON - 19