CHANGING THE FUSE
If the TV/radio/cassette stops working properly while using vehicle battery power, follow these steps to check the DC power cord’s 2 amp fuse. If the fuse needs replacing, use only a
Caution: Do not use a fuse with a differ- ent rating.
1.Unscrew the knurled ring and check the fuse in the DC power cord.
2.If the fuse is bad, replace it.
illus of disassembled fuse holder with knurled ring, fuse visible
3.Replace the knurled ring and tighten it securely.
THE FCC WANTS YOU TO KNOW
This TV/radio/cassette complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits provide reasonable protec- tion against radio and TV interference in a residential area. However, your TV might cause TV or radio interference even when it is operating properly. To eliminate interference, you can try one or more of the following corrective mea- sures:
•Reorient or relocate the receiving antenna.
•Move your TV/radio/cassette away from the TV or radio receiving the interference.
•Connect your TV/radio/cassette to an outlet on a different electrical cir- cuit than the TV or radio receiving the interference.
•Consult your local RadioShack store for assistance.
If you can not eliminate the interference, the FCC requires that you stop using your TV/radio/cassette.
18
