SPECIFICATIONS
Nominal Impedance | 4 or 8 ohm ±20% |
Frequency Response | 30 |
Free Air Resonance (Fs) Frequency | 34 Hz |
Infinite Baffle Resonance Frequency | 31 Hz |
Piston Area (SD) | 0.0553 m2 |
Maximum Power | 120 W |
Power Handling | 60W RMS |
Flux Density (BL) | 7.41 |
DC Voice Coil Resistance (RE, ohms) | 3.4 ohms/6.8 ohms |
Voice Coil Inductance (LVC at 1 kHz) | 0.22/0.84 mH |
SPL | 85 or 88 ±3 db/1W/1m |
Moving Mass (Mms) | 52.21 g |
Electrical Q Factor (QES) | 3.09/1.55 |
Mechanical Q Factor (QMS) | 5.03 |
Total Q Factor | 1.89/1.18 |
Equivalent Acoustic Volume (VAS) | 163.5 L |
Mechanical Suspension Compliance (CMS, UM/N) | 413.2 UM/N |
Mechanical Mass of Cone Assembly and Free Air Load | 1.8 oz (52.21 g) |
Mechanical Mass of Cone Assembly Only | 1.4 oz (39.62 g) |
5/32 Inch (4.00 mm) | |
Cutout | 1029/32 Inches (27.7 cm) |
Depth | 51/32 Inches (12.8 cm) |
Magnet Weight | 20 oz (567 gm) |
Speaker Weight | 63 oz (1.786 kg) |
Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.
3
