4
OPERATION

SETTING THE TIME

To set the hour, hold down TIME and re-
peatedly press (or hold) HOUR until the
desired hour appears. PM lights to indi-
cate a PM hour.
To set minutes, hold down TIME and re-
peatedly press (or hold) MINUTE until the
desired minutes appear.

ADJUSTING THE DISPLAY

BRIGHTNESS

Set DIMMER HI/LO to HI or LO to adjust
the display’s brightness as desired.

PLAYING THE RADIO

1. Rotate VOLUME to the left to turn
down the volume.
2. To turn on the radio, slide ALARM/
AUTO/OFF/ON to ON.
3. Slide BAND to FM or AM then rotate
VOLUME to a comfortable listening
level.
4. Rotate TUNING. A pointer indicates
the station’s frequency on the dial
below the clock.
Note: The AM antenna is built-in.
Rotate the clock radio for the best
AM reception. The AC power cord
also serves as the FM antenna. For
the best FM reception, fully extend
the AC power cord.
5. To turn off the radio, slide ALARM/
AUTO/OFF/ON to OFF.

USING THE SLEEP TIMER

You can set the radio to play for up to 2
hours and then automatically turn off.
Follow these steps to set the play time.
1. Slide ALARM/AUTO/OFF/ON to the
desired alarm sound (AUTO for the
radio, or ALARM for the buzzer).
2.

To play the radio for 1 hour,

press
SLEEP. The radio turns on, plays 1
hour then automatically turns off.

To set the play time between 1 and

2 hours,

press SLEEP. The radio
turns on and 0:59 appears. Then
hold down SLEEP and press HOUR.
The time changes to 1:59.
12-1615.fm Page 4 Friday, August 13, 1999 9:29 AM