Optimus CTR-109 owner manual Operation, Loading A Cassette Tape, Playing A Cassette Tape

14-1116.fm Page 8 Friday, January 8, 1999 10:30 AM

OPERATION

LOADING A CASSETTE TAPE

1.Take up any slack in the tape by turning one of the cassette’s hubs with a pencil.

PLAYING A CASSETTE TAPE

1.Load the cassette tape.

2.Press PLAY. The cassette plays until it reaches the end of the side, then it automatically stops.

MICCTR-109 CASSETTE RECORDER

AC / DC / BATTERY

RECORD	PLAY	REWIND	FAST-F	STOP	PAUSE
		REVIEW	CUE	EJECT

Caution: If you do not remove the excess slack, the tape could become tangled in the record/ playback mechanism.

2.Press STOP/EJECT to open the cassette compartment door.

MICROPHONE
RECORD	PLAY	REWIND	FAST-F	STOP	PAUSE
		REVIEW	CUE	EJECT

3.Load the cassette into the slot in the door with its open edge out, the side you want to play facing up, and its full reel to the left.

Notes:

•Press PAUSE to temporarily stop playback. Press PAUSE again to resume playback.

•If you hold down REWIND/ REVIEW or FAST-F/CUE while the tape is playing, you can hear the tape as it moves at a faster speed. This makes it easy to locate a specific part of a recording. When you release

REWIND/REVIEW or FAST-F/ CUE, the tape plays at its nor- mal speed.

4.Close the door.

8