Optimus HTS-102 specifications Caring for Your Speakers, Connecting Speakers

Models: HTS-102

1 4
Download 4 pages 63.41 Kb
Page 1
Image 1
HTS-102 Home Theater System

Cat. No. 31-3043

HTS-102 Home Theater System

Your HTS-102 home theater system includes the STAV- 3770 receiver (RadioShack 31-3042, with its owner’s man- ual and accessories), two front speakers, two surround- sound (rear) speakers, one center speaker, and one sub- woofer. All you need to add to have a complete home the- ater system are an audio/video input source (stereo Hi-Fi VCR or DVD/LD player) and a TV.

For receiver instructions and the HTS-102’s warranty, refer to the STAV-3770 Owner’s Manual. The instructions on the next few pages only cover basic home theater and speaker connections. Before making any connections, see “Positioning Speakers” on Page 5 of the STAV-3770 Own- er’s Manual to choose the best locations for your speak- ers.

 

Center Speaker

 

TV

Front Left

Front Right

Speaker

Speaker

 

Listening

 

Area

Rear Left

Rear Right

Speaker

Speaker

Caring for Your Speakers

Use a polishing cloth or dry cloth to wipe off dust and dirt.

If the cabinet is very dirty, wipe it with a soft cloth dipped in a neutral cleanser diluted with water, then wipe again with a dry cloth. Do not use furniture wax or cleaners.

Never use thinner, benzene, insecticide sprays, or other chemicals on or near the cabinets.

Never use a vacuum cleaner to clean the grille cloth.

Connecting Speakers

Your HTS-102 system includes all speaker wires required for speaker connections. Each speaker wire consists of two conductors (individual wires) encased in insulation and is color-coded so you can identify each conductor (the color mark is on only one of the conductors in each speak- er wire pair). Use these colors as a guide to help you prop- erly connect the speakers.

If the supplied speaker wires are too short for your con- nections, you can purchase additional wire at your local RadioShack store. Use 16-gauge (or larger) speaker wire for all speaker connections.

Speaker Specifications

Power Handling (all speakers)

................ 35W RMS, 105W MAX

Nominal

Front/Center

Rear

Subwoofer

 

 

 

Impedance

............ 8 Ohms

16 Ohms ....

8 Ohms 2 Ch (L/R)

Sensitivity

86.5 dB

86 dB

 

Supplied Accessories

Quantity

Description

Colors

 

 

 

 

 

Speaker Wires

 

 

 

 

2

Receiver Out to Subwoofer In

Light Blue/Pink

 

 

 

2

Subwoofer Out to Front Speakers

Dark Blue/Red

 

 

 

2

Receiver Out to Surround-Sound

Green/Orange

 

Speakers

 

 

 

 

1

Receiver Out to Center Speaker

Yellow

 

 

 

Patch Cable

 

 

 

 

1

VCR Out to Receiver In

Red/White

 

 

 

When connecting each conductor to a speaker terminal, hold down the terminal lever, insert the conductor’s end into the small hole, and release the terminal lever to se- cure the conductor.

When connecting each conductor to the receiver, press open the terminal lever, insert the conductor’s end into the small hole, and press the lever closed to secure the con- ductor.

Notes:

Be sure you connect the receiver’s right and left posi- tive (+) and negative (–) terminals to the speaker’s corresponding right and left positive (+) and negative

(–) terminals.

Do not connect two pairs of speakers to a single set of terminals.

Surround speakers generally sound best if you posi- tion them above ear level.

© 1998 Tandy Corporation.

All Rights Reserved.

RadioShack and Optimus are registered trademarks used by Tandy Corporation.

Page 1
Image 1
Optimus HTS-102 specifications Caring for Your Speakers, Connecting Speakers, Speaker Specifications, Supplied Accessories