2.Separate the wire conductors for a length of about 2 inches, then remove about 1/2 inch of insulation from the wire’s ends using a wire stripper.
MAINTENANCE
To enjoy your Optimus
•Keep the speaker dry. If it gets wet, wipe it dry immediately.
•Use and store the speaker only in normal temperature environments.
3.Press the speaker’s black nega- tive
4.Press the speaker’s red positive
(+)terminal tab and insert the other bare wire end into the open- ing. Then release the tab.
5.Using the speaker wire’s coding as a guide, connect the other end of the speaker wire to the amplifier’s corresponding (right or left) speaker terminals.
•Handle the speaker gently and carefully. Don’t drop it.
•Keep the speaker away from dust and dirt.
•Clean the speaker’s cabinet with a soft, dry cloth.
Caution: You might permanently damage your speaker by cleaning it with a vacuum cleaner. Instead, use a feather duster or a soft cloth.
Modifying or tampering with the speak- er’s internal components can cause a malfunction and invalidate its warranty. If your speaker is not performing as it should, take it to your local RadioShack store for assistance.
3
