Optimus PRO CS-5 manual Using Rubber Feet, Maintenance

40-4065.fm Page 3 Wednesday, August 11, 1999 9:53 AM

6.Connect the other end of the unmarked wire to the amplifier’s negative (–) output terminal.

USING RUBBER FEET

Self-adhesive rubber pads are provid- ed to keep your speaker from scratch- ing your furniture or slipping off of the TV. The pads also angle your speaker so it points more directly at your listen- ing area.

To use the rubber pads, remove the paper backing and apply them to the bottom of the speaker.

•If you mounted your speaker above the TV set, apply the thicker pads on the rear and the thinner pads on the front of the speaker.

•If you mounted the speaker below the TV set, apply the thinner pads on the back and thicker pads on the front of the speaker.

MAINTENANCE

Your PRO CS-5 Center-Channel Speaker System is an example of su- perior design and craftsmanship. The following suggestions will help you care for the PRO CS-5 speaker so you can enjoy it for years.

•Keep the speaker dry. If it gets wet wipe it dry.

•Handle the speaker gently and carefully.

•Use and store the speaker only in normal temperature environ- ments.

•Keep the speaker away from dust and dirt.

•Wipe the speaker with a damp cloth occasionally to keep it look- ing new.

Caution: You might permanently dam- age your speaker by cleaning it with a vacuum cleaner. Use a feather duster or a very soft cloth instead.

Modifying or tampering with the speak- er’s internal components can cause a malfunction and might invalidate the speaker’s warranty. If your speaker is not performing as it should, take it to your local RadioShack store for assis- tance.

3