Optimus SCP-101 manual Fm Page 8 Tuesday, July 27, 1999 1250 PM

14-1253.fm Page 8 Tuesday, July 27, 1999 12:50 PM

Cautions:

You must use a power source that supplies

!3V DC and delivers at least 300 mA. Its cen- ter tip must be set to positive and its plug

must fit the SCP-101's DC 3V jack. Using an adapter that does not meet these specifications could dam- age the SCP-101 or the adapter.

•Always connect the DC adapter to the SCP-101 be- fore you connect it to the power source. When you finish, disconnect the adapter from the power source before you disconnect it from the SCP-101.

Follow these steps to power the SCP-101 from DC power.

1.If the adapter has a voltage switch, set the switch to 3V.

2.Insert the Adaptaplug into the adapter's cord so it reads TIP+.

8