Using Advanced Sound Options
Sound Mode Adjustments (Remote Control Only)
Note: If you do not use a center speaker, the monaural signals are only repro- duced if you select PHANTOM.
Center Mode Setting
The center mode setting affects the center channel’s bass signals. It operates only when you select the Dolby Pro Logic Surround or Dolby 3CH Logic mode. Slide AUDIO∙SURROUND on the remote control to SURROUND. Each time you
presson the remote control, the setting changes and the receiver’s corresponding indicator lights: NORMAL, WIDE, or PHANTOM Dolby Pro Logic Surround options, or 3CH LOGIC.
NORMAL — Select this mode if you use a small center speaker. The front left and right speakers play the
WIDE — Select this mode if you use a medium or large center speaker. The center speaker plays the
PHANTOM — Select this mode if you have no center speaker. All
Test Tone
The test tone feature provides a test tone that lets you balance the signal levels between all your speakers. To adjust the levels, see “Center Level” and “Rear Level.”
To activate the test tone, select one of the surround sound modes and set AUDIO∙SURROUND on the remote to SURROUND. Then press TEST TONE. The receiver sounds a
In the Dolby 3CH Logic sound mode, the receiver sounds a
Press TEST TONE again to turn off this feature.
Notes:
•Use the VOLUME control to adjust the overall sound level.
•Set the center mode to a selection other than PHANTOM before adjusting the center level.
Center Level
Press – CENTER LEVEL + to adjust the center speaker sound level while in the Dolby Pro Logic Surround or Dolby 3CH Logic mode.
Rear Level
Pressto adjust the rear speakers’ sound level while in the Dolby Pro Logic Surround or Simulated Surround mode.
Notes:
•For Dolby Pro Logic Surround, the de- lay is preset to 5 ms.
•The delay time does not affect the Stu- dio Effect mode.
Delay Time
In the Simulated Surround and Dolby Pro Logic Surround modes, the receiver slightly delays the sound going to the rear speakers. You can change the delay time from 15 to 30 milliseconds (ms) in 5 ms steps. Adjust this for the best sur- round effect.
Slide AUDIO∙SURROUND to SURROUND. Then hold down DELAY TIME to change the delay time. The receiver displays the selected time.
21