Optiquest Q115 Operation

Optiquest Q115

Operation

Adjust your Optiquest Q115 monitor using the buttons and Control Wheel as

shown below.

Power light:

Green = On

Orange = Power

(Flashing) Saving

Mode

Power*

On/Off

Button

Control

Wheel

ENTER

Button

Operation

* The monitor automatically

degausses

each time you turn it on, removing the buildup of magnetic

fields that can affect color purity and convergence. To prevent possible damage, if you turn the

monitor off, wait 20 minutes before turning it on again. Do not turn the monitor on and off

repeatedly. To manually degauss the monitor, see the instructions on page 10.

To adjust the monitor, follow the numbered steps in sequence as shown below:

1To display the OnView® (Picture Management) Main Menu push the

MENU/EXIT button.

2To select the control you want to adjust, turn the Control Wheel.

Clockwise scrolls down through the menu; counter-clockwise scrolls up

through the menu.

3With your selection highlighted, push the ENTER button. The adjustment

screen for the selected controls display.

NOTE: Many of the controls are grouped in pairs, so you may have to

push the ENTER button again to toggle to the control you want to adjust.

4To adjust the control you selected, turn the Control Wheel. The number

displayed on the adjustment screen changes accordingly.

5When finished making adjustments, press the MENU/EXIT button to save

your changes and return to the Main Menu.

6To exit the menu, press the MENU/EXIT button again.

MENU/EXIT

Button