N0.4
Technical data:
Input Voltage: 110VAC/60HZ
Output Voltage: 3A
Fuse: 1A
IR Remote Control Distance: ≤8m, ±15°Horizontal
12V Trigger Jack: OD3.4xID1.3
12V Trigger Signal:
Current: ≥2mA
IR Handset: 1pc
Switch control: 1pc
Unpack screen carefully, be sure screen is in good condition, and check that all accessories are included inside carton.
Care in mounting and care in correct operation will mean a long and satisfactory life for your Panoview screen. Locate the screen where the audience can best see it and where other furnishings in the room permit.
Check that voltage and frequency marked on screen is in accordance with local power utility. It is suggested only to use screen indoor under normal temperature and humidity conditions.
