Operation
Maintenance
Operating the Vacuum
1.Attach the desired accessory to the end of the suction hose.
2.Unwind the necessary length of cable and insert the plug in a 120V/60Hz socket.
3.Vacuum at a steady speed. There is no need to exert pressure.
!WARNING!
Performing maintenance on the vacuum while it is plugged into a wall outlet may result in unexpected vacuum operation, shock and personal injury. Always turn the vacuum OFF and unplug before performing inspection and maintenance.
Emptying the Dust Container
For maximum performance of your Oreck Little Helper™ Vac, the dust container needs to be emptied when it becomes approxi- mately 1/3 full or if the suction power of the unit is reduced.
To empty the dust container:
1. Disconnect the suction hose from the hose intake.
2. Press the dust container release button to release
the dust container and
then slide it off the unit base.
3. Lift the dust container release to open to bottom
panel of the dust container.
4. Empty the contents of the dust container into the
trash can.
5. Close the bottom panel of the dust container and slide it on the unit base until it snaps into place.
