E N G L I S H
Blower Port
If caddy needs to be removed, a large
Blower Port
The blower port is located at the rear
of the machine. Installation of tools is the same as described for suction port.
Pull cord through center opening in caddy and push until it is seated at back of slot at rear of center opening in caddy.
Cord Dump
Twist cord dump to easily release stored cord.
Plug cord into electrical outlet. Power Switch
Push power switch to “ON” (I) position.
Insert crevice tool, brush and fabric tool into caddy in spaces provided.
AssemblyMaintenance
Attach Caddy and Insert Tools
Locate caddy clip indents at top rear |
|
corners of appliance. Place appliance |
|
on firm, |
|
your lap. Grasp handle firmly. Place |
|
end of caddy in outside indent then |
|
strongly push and pull other end of |
|
caddy into opposite indent. Be sure |
|
rims on caddy openings face up. |
|
Avoid trapping fingers when caddy |
|
snaps on; painful pinch could result. | 5 |
A
CHANGING THE FILTER BAG
A. Use only genuine ORECK XL filter bags. Stand unit on its back. Holding strap away from door, twist knob counterclockwise to release and lift out front plate. B.