E N G L I S H
DTX 1400B Getting Ready for Use
Insert power handle into telescopic wand until button locks.
To unlock the wand, step on the release button located on the power nozzle. Gently lean wand back for vacuum use.
Extend telescopic wand by holding telecscopic length adjustment and pulling power handle.
TO ASSEMBLE TELESCOPIC WAND WITH STANDARD NOZZLE OR ACCESSORIES.
Connect the hose by firmly inserting end of hose into canister intake opening until it clicks.
To disconnect hose, turn hose lock on canister intake to unlock hose and remove.
Insert power handle into larger end of telescopic wand (while holding down button lock, firmly push power handle into wand until seated).
Insert small end of telescopic wand into either standard nozzle or accessory tools.
Operating Instructions
Polarized Plug Notice
This product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact an electrician to replace the obsolete outlet. Do not defeat the purpose of the polarized plug. Note: Hose must be connected for unit to operate.
Pull plug from unit and insert into wall outlet.
Press the On/Off pedal located at the rear of the canister to turn on.
|
| Turn handle switch to ( l ) |
|
| position for unit only or ( ll ) |
|
| position for unit and power |
|
| nozzle. The On/Off pedal |
|
| on canister must be On for |
( ll ) | ( l ) | the handle switch to |
|
| operate. |
6
