E N G L I S H
Getting Ready for Use
Turn handle switch to ( l ) position for unit only or ( ll ) position for unit and power
CORD CHANNEL
BUTTON
Insert power nozzle plug into the plug holder on upper wand.
Pulling cord down, press cord into cord channel on bottom wand.
For convenience, do not disassemble for storage.
Insert power handle into upper wand until button locks.
Pull plug from unit and insert into wall outlet.
( ll )( l )
CARPET
BARE FLOOR
nozzle. The On/Off pedal on canister must be On for the handle switch to operate.
Using the standard nozzle, the nozzle is adjustable for use on carpets (without brush) or hard floors (with brush).
To adjust suction, use the suction control slide on the standard handle and power handle.
To adjust power of motor, use the slide control on top of unit.
Operating Instructions
Polarized Plug Notice
This product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact an electrician to replace the obsolete outlet. Do not defeat the purpose of the polarized plug.
Note:
Hose must be connected for unit to operate.
Press the On/Off pedal located at the rear of the canister to turn on.
Upholstery tool, crevice tool and dusting brush can be found in storage compartment.
Small accessories can be used with telescopic wand or handle alone.
5
