Troubleshooting Guide
CAUTION: Always disconnect power cord before servicing vacuum.
WARNING: Repairs should only be performed by an authorized service center.
Problem: Loss of Vacuum | Solution: | ||
Cause: | |||
1. | Damaged lid. | 1. | Inspect and replace if needed. |
2. | Full paper filter bag. | 2. | Replace paper filter bag. |
3. | Clogged hose or wand. | 3. | Remove obstruction. |
|
|
| |
Problem: Dust blowing from |
|
| |
vacuum when running. |
|
| |
Cause: | Solution: | ||
1. | Full paper filter bag. | 1. | Replace filter bag. |
2. | Improperly installed paper | 2. | Reinstall or replace paper filter |
| filter bag. |
| bag. |
3. | Cloth filter bag dirty. | 3. | Clean cloth filter bag. |
|
|
|
|
ALL OTHER SERVICING SHOULD BE DONE BY AN ORECK AUTHORIZED SERVICE CENTER.
CALL CUSTOMER SERVICE HOT LINE
COMMERCIAL:1-800-336-0433
HOSPITALITY: 1-888-23-ORECK
CANADA: 1-888-67-ORECK
Whenever calling, please be sure to have your model and serial number from data plate.
XLPRO6A & XLPRO6Z Parts Listing
Item # | Part # | Description |
1 | 6 Qt Body | |
2 | 6 Qt Lid | |
6 | PK25PRO6DW | 6 Qt Paper Bag, 25 Pk |
7 | 6 Qt Cloth Bag | |
8 | Complete Dome Filter | |
12 | Motor | |
14 | Screws, Motor | |
15 | Washers, Motor | |
16 | Motor Deflector Plate | |
17 | Screw, Motor Deflector | |
18 | Sound Filter Band | |
19 | Dual Cell Noise Filter | |
20 | Cushioned Back Pad | |
21 | Waist Belt (Not Shown) | |
22 | Screw, Waist Belt | |
23 | Washer, Waist Belt | |
25 | On/Off Switch | |
26 | Power Cord, 17” | |
28 | COMMCORD | 50’ Electrical Cord |
38 | Cushion Support Clamp | |
39 | Screw (Cord Lock) | |
40 | Set, Motor Brushes | |
Accessories |
| |
Item # | Part # | Description |
29 | 2 Pc Aluminum Wand | |
31 | 5” Upholstery Tool | |
32 | 14” Scalloped Floor Tool | |
33 | 17” Crevice Tool | |
36 | Stretch Hose w/Cuffs | |
37 | 3” Dust Brush | |
41 | Floor Replace Brush | |
42 | Bristle, Floor Tool |
Parts Diagram
(33)(29)
(36)
(37) |
|
(32) | (31) |
|
XLPRO10A Parts Listing
Item # | Part # | Description |
1 | 10 Qt Body | |
2 | 10 Qt Lid, Complete | |
3 | Lid Latch | |
4 | Lid Rivet | |
6 | PK25PRO10DW | 10 Qt Paper Bag, 25 Pk |
7 | 10 Qt Cloth Bag | |
8 | Complete Dome Filter | |
12 | Motor | |
14 | Screws, Motor | |
15 | Washers, Motor | |
16 | Motor Deflector Plate | |
17 | Screw, Motor Deflector | |
18 | Sound Filter Band | |
19 | Dual Cell Noise Filter | |
20 | Cushioned Back Pad | |
21 | Waist Belt (Not Shown) | |
22 | Screw, Waist Belt | |
23 | Washer, Waist Belt | |
25 | On/Off Switch | |
26 | Power Cord, 17” | |
28 | COMMCORD | 50’ Electrical Cord |
38 | Cushion Support Clamp | |
Screw (Cord Lock) |
| |
40 | Set, Motor Brushes | |
Accessories |
| |
Item # | Part # | Description |
29 | 2 Pc Aluminum Wand | |
31 | 5” Upholstery Tool | |
32 | 14” Scalloped Floor Tool | |
33 | 17” Crevice Tool | |
36 | Stretch Hose w/Cuffs | |
37 | 3” Dust Brush | |
41 | Floor Replace Brush | |
42 | Bristle, Floor Tool (Sold Separately) |
©2005 Oreck Holdings, LLC. All Rights Reserved. All word mark, logos, product configurations, and registered trademarks are
owned and used under the authority of Oreck Holdings, LLC.42462 REV H 12/05