Oregon EB313HG Getting Started, Alarms, Batteries, shows the batteries are low, Set Clock

EN

GETTING STARTED

BATTERIES

This unit operates with 2 x CR2032 batteries.

Insert batteries before first use, matching the polarity as shown in the battery compartment.

NOTE shows the batteries are low.

CHANGE SETTINGS

1.Press and hold MODE for 2 seconds to enter setting mode.

2.Press + or – to change settings.

3.Press MODE to confirm.

TABLE STAND OR BELT CLIP

You can wear the belt clip on your belt or use it as a stand. To use the belt clip as a stand, remove the belt clip from the back of the monitor. Insert the left or right side of the clip into the lower part of the slot then snap the other side of the clip into the other lower slot.

CLOCK

This product shows the current time, and day-of-week in English, French, German, Italian, or Spanish.

SET CLOCK

1.Press and hold MODE for 2 seconds. The Clock Area will blink.

2.Select the time zone, hour, minute, year, month, day, and language. Press + or – to change the setting. Press MODE to confirm.

NOTE The language options are (E) English,

(F) French, (D) German, (I) Italian, and (S) Spanish.

NOTE The time zone options are (PA) Pacific, (CE) Central, (MO) Mountain, and (EA) Eastern.

SWITCH CLOCK DISPLAY

Press MODE to toggle between Clock with Seconds and Clock with Weekday display.

ALARMS

This product is equipped with a 2-minute alarm.

VIEW ALARM SETTINGS

Press ALARM. The Alarm Time and ((.)) icon will show in the Clock Area.

2

EB313HG_EN_final 2 1/11/05, 2:52 PM