Oregon RM962 Seconds and DAY-OF-THE-WEEK Display, Interference, Day-of-the-week display

(MSF-60) from Rugby, England)

When the batteries are first installed, the unit will automatically search for a radio signal.

When in search mode, the antenna icon [ ] will blink. This process takes between two (2) and ten (10) minutes. After initial search, short periodic reception-signal scans will commence several times a day.

The antenna icon indicates the quality of reception.

STRONG	NO RECEPTION
WEAK	RECEIVING

When the reception is complete, the radio-reception signal will stop blinking.

Interference

Reception can be affected by a number of factors. For best reception, place the device away from metal objects and electrical appliances.

Note: Interference from sources such as TV sets can affect the signal. If, after batteries have been inserted for ten minutes, the signal is not received, then set the time manually (see section: How To Set The Calendar Clock Manually).

To deactivate the auto-reception of RF signal, press and hold both [

] and [ ] buttons for 2 seconds. The antenna icon will disappear	EN
to show this deactivation.
To activate the auto-reception again, press and hold both buttons for
2 seconds again and the antenna icon will re-appear.

“SECONDS” AND DAY-OF-THE-WEEK

DISPLAY

The “seconds” and the day-of-the-week share the same section of the display.

day-of-the-week display “second” display

The day-of-the-week is displayed as an abbreviation in five lan- guages.

To change the “seconds” display to the day-of-the-week display:

• When the “seconds” are displayed, press MODE once.

To change the day-of-the-week display to the “seconds” display:

• When the day-of-the-week is displayed, press MODE once.

3