Oregon RMR616HGA user manual Reset System, Safety And Care, Warnings, Minimum / Maximum Records

To auto-scan between sensors, press and hold CHANNEL for 2 seconds. Each sensor's data will be displayed for 3 seconds. To end auto-scan, press CHANNEL or MEM.

NOTE If you use a sensor that collects only temperature data, humidity will not be shown.

MINIMUM / MAXIMUM RECORDS

Press MEM to toggle between current, maximum (MAX) and minimum (MIN) records for the selected sensor. To clear the records, press and hold MEM for 2 seconds.

A beep will sound to confirm that the memory has been cleared.

RESET SYSTEM

The RESET buttons are located in the battery compartments for the main unit and sensors. Press RESET when you change the batteries and whenever performance is not behaving as expected (for example, unable to establish radio frequency link with remote sensor or radio-controlled clock).

11

NOTE When you press RESET, all settings will return to default value, and you will lose all stored information.

SAFETY AND CARE

Clean the product with a slightly damp cloth and alcohol- free mild detergent. Avoid dropping the product or placing it in a high-traffic location.

WARNINGS

This product is designed to give you years of service if handled properly. Observe the following guidelines:

•Never immerse the product in water. This can cause electrical shock and damage the product.

•Do not subject the main unit to extreme force, shock, or fluctuations in temperature or humidity.

•Do not tamper with the internal components.

•Do not mix new and old batteries or batteries of different types.

•Do not use rechargeable batteries with this product.

•Remove the batteries if storing this product for a long period of time.

•Do not scratch the LCD display.

EN

RMR616HGA lab test R2 11 1/17/04, 5:03 PM