EN
GETTING STARTED
BATTERIES
Batteries for the remote and main units are supplied with this product. Replace them whenever the low
battery signal ( 
) displays. The battery door is located on the bottom of the main unit. Use a small Phillips screwdriver to remove the remote unit compartment lid. Be sure to match the correct polarity, as shown in the battery compartment. After you change the batteries, press the RESET button with the point of a blunt object (such as a ball point pen).
NOTE Insert the batteries in the remote unit before you set up the main unit. Do not use rechargeable batteries.
AC POWER ADAPTER
An AC power adapter is supplied for use with this product. You must connect the power adapter if you wish to use the continuous projection feature. The jack is located next to the battery compartment.
NOTE If the AC power becomes unavailable, the unit will automatically switch to battery power.
8
