EN

FOCUS IMAGE

The FOCUS switch is located on the back of the unit. Rotate to adjust.

CONTINUOUS PROJECTION

The AC power adapter must be plugged in to use this feature ( 6).

1.Press and hold SNOOZE/LIGHT for 2 seconds when the projection is on. When activated, the time and alarm status will project continuously.

2.Press and hold SNOOZE/LIGHT for 2 seconds again to deactivate.

RESET SYSTEM

The RESET button is located in the battery compartment. Press it with the tip of a blunt object (such as a ball point

pen) whenever you change the batteries, or whenever performance is not behaving as expected (e.g., unable to establish radio frequency link with automatic clock, etc.) This will return all settings to default value (barometric pressure history, alarm setting, etc.)

SAFETY AND CARE

Wash the unit with a slightly damp cloth and mild detergent. Avoid dropping the unit or placing it in a high-traffic location.

WARNINGS

This product is designed to give you years of service if handled properly. Observe the following guidelines:

12

Page 13
Image 13
Oregon Scientific PS-S02/PS-S02U user manual Focus Image, Continuous Projection, Reset System, Safety and Care