TEMPERATURE
To toggle the temperature unit:
Press °C / °F.
To view outdoor sensor temperature readings: Press CHANNEL.
•
shows which remote sensor’s data you are viewing.
•
is permanently displayed in the indoor temperature area.
To
Press and hold CHANNEL for 2 seconds. Each sensor’s data is displayed for 3 seconds.
To end
Press CHANNEL or MEM.
To toggle between current, minimum and maximum records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM for 2 seconds.
TEMPERATURE TREND
Recent indoor / outdoor temperature trends are shown by the trend icon.
RISING | STEADY | FALLING |
|
|
|
|
|
|
ICE WARNING
If the channel 1 sensor falls between 3°C to
(37°F to 28°F), flashes to warn you that the temperature is approaching freezing.
NOTE The warning will automatically stop if the temperature goes outside the
HI / LO TEMPERATURE ALARM
An alarm can be set to sound if the sensor set to channel 1 records above or below a temperature of your choice.
To set alarm ON / OFF:
1.Press and hold TEMP HI / LO 
.
2.Use 
or 
to select high / low temperature alarm. Press TEMP HI / LO 
to confirm.
3.Press 
or 
to set alarm ON / OFF and press TEMP HI / LO 
to confirm.
4.If alarm has been activated, use 
or 
to select the temperature.
5.Press TEMP HI / LO 
to confirm.
To silence the hi / lo temperature alarm:
Press any key. The alarm resets automatically and will resound if the hi / lo temperature selected is recorded again.
RESET
Press RESET to return the unit to the default settings.
PRECAUTIONS
This product is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions:
•Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft,
•Do not clean the unit with abrasive or corrosive materials.
•Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts.
•Do not tamper with the unit ’s internal components. Doing so will invalidate the warranty on the unit and may cause unnecessary damage. The unit contains no
•Only use fresh batteries as specified in the user’s instructions. Do not mix new and old batteries.
•Do not use rechargeable batteries.
•Remove batteries when storing the product for a long time.
•Due to printing limitations, the displays shown in this manual may differ from the actual display.
•The contents of this manual may not be reproduced without the permission of the manufacturer.
NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice.
SPECIFICATIONS
TYPE | DESCRIPTION |
Main unit |
|
Dimensions | 86 x 79 x 53 (mm) |
(L x W x D) | 3.4 x 3.1x 2.1 (in) |
Weight | 80 g (2.82 lbs) without battery |
Remote unit |
|
Dimensions | 92 x 60 x 20 mm |
(L x W x D) | (3.6 x 2.4 x 0.8 in) |
Weight | 62 g (2.22 ounces) without battery |
Temperature unit – °C / °F | |
Indoor range | |
Outdoor range | |
Resolution | 0.1°C (0.2°F) |
Remote unit |
|
RF frequency | 433MHz |
Range | Up to 30 meters (100 ft) |
| with no obstructions |
Transmission | Approx. every 40 seconds |
Channel no. | 1, 2 or 3 |
Clock |
|
Clock display | HH:MM |
Hour format | 12hr AM/PM or 24hr |
Calendar | DD/MM or MM/DD |
Weekday in 5 | (E, G, F, I, S) |
languages |
|
Alarm | |
Power |
|
Main unit | 2 x |
Remote unit | 2 x |
NOTE We recommend that you use alkaline batteries with this product for longer usage and lithium batteries in temperatures below freezing.
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children’s electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones. The website also includes contact information for our Customer Care department in case you need to reach us, as well as frequently asked questions and customer downloads.
We hope you will find all the information you need on our website, however if you’re in the US and would like to contact the Oregon Scientific Customer Care department directly, please visit: www2.oregonscientific.com/service/default.asp
OR
Call
For international inquiries, please visit: www2.oregonscientific.com/about/international.asp
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio / TV technician for help.
DECLARATION OF CONFORMITY
The following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www.oregonscientific. com), or on the warranty card for this product) for all inquiries instead.
We |
|
Name: | Oregon Scientific, Inc. |
Address: | 19861 SW 95th Ave., Tualatin, |
| Oregon 97062 USA |
Telephone No.: | |
declare that the product | |
Product No.: | RAR681 |
Product Name: | Wireless Indoor / Outdoor |
| Thermometer |
| with Digital Clock |
Manufacturer: | IDT Technology Limited |
Address: | Block C, 9/F, Kaiser Estate, |
| Phase 1,41 Man Yue St., |
| Hung Hom, Kowloon, |
| Hong Kong |
is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation.
©2006 Oregon Scientific. All rights reserved.
RAR681_EN.indd 2
2005.12.9 2:21:27 PM 
