Oregon Scientific RMB383A HOW to Activate the BACK-LIGHT, Display Modes, Japan-East, Release

GB

	ANTENNA		DISPLAYED ICONS
	EUROPE
	JAPAN-WEST/ USA/ UK
	JAPAN-EAST
For the JAPAN-WEST		/USA/UK	antenna, follow the steps below
to pick up one of the three signals.

1.Plug in this antenna as instructed and the icon display will be flashing. This unit is able to store the last used signal (e.g. if the UK antenna was the last one used, after re-plugging in the

	antenna, the		icon will be displayed first).
2.	Use	[ ▲] or	[ ▼] to select between the 3 signals.
3.	Press	[MODE]	to confirm or simply leave it idle for 1 minute.
	The entry will be confirmed and auto-reception will be activated
	accordingly. The radio-reception icon will be flashing.
4. If the US signal is chosen, the ZONE icon will appear. Press
	[MODE]		then use	[ ▲ ] or	[ ▼ ] to toggle among the 4	US
	time-zones: Pacific (P), Mountains (M), Central (C) or Eastern
	(E).
5.	Press	[MODE]	to confirm or simply leave it idle for 1 minute.
	The entry will be confirmed and auto-reception will be activated
	accordingly. The radio-reception icon will be flashing.
Without plugging-in the antenna, the main unit can be used alone
and act as a multi-functional digital clock.
To	unplug the	antenna,	simply press	the	[RELEASE]	button and
then pull out the antenna.

HOW TO ACTIVATE THE BACK-LIGHT

Press [ SNOOZE ] to turn on the back-light for 5 seconds.

Note:

-The EL panel that provides illumination will lose power after extensive usage.

-The unit may emit a quiet hissing sound whenever the display

is illuminated by the EL backlight. This is due to vibration of the EL panel used for illumination and does not indicate malfunction of the unit.

DISPLAY MODES

Press [MODE]			to display the following in sequence:
1) Current		T ime	2) Current	T ime with Second Indication
	Calendar		Calendar

4