EN
Dual Watch (DW)
The Dual Watch feature allows you to monitor more than one channel simultaneously.
To set Dual Watch:
1.Press 
6 times until “DW” appears and the channel number starts flashing.
2.Press and hold 
or 
to select a watch channel
3.Press 
to confirm and exit the menu. Or, press 
to confirm and go to the next Menu Option. Once set, the display will toggle between 2 open channels and the unit will be able to receive transmissions from the 2 channels (your existing channel and the channel set in DW).
To disable Dual Watch:
Follow steps
SCAN FOR A CHANNEL / CTCSS
There are 2 scenarios when scanning for a channel / CTCSS is necessary:
1.If you have a CTCSS code set and want to make sure that the channel is not busy.
2.If you are in a fringe area and the radio is cutting in and out.
To auto-scan for a channel / CTCSS:
1.Press and hold 
. The unit will go to monitor mode.
2.Press and release 
, the unit will start enter scan mode.
3.Once an active channel is found the unit will stop scanning. Press
to communicate with other radios on that channel or 
to resume scanning.
13
