Oregon Scientific VR101 user manual Safety & Care Instructions, Getting Started

SAFETY & CARE INSTRUCTIONS

SAFETY PRECAUTIONS

Please observe the following safety precautions when setting up and using this product.

•Heat sources-Keep the product away from heat sources, such as radiators, stoves, heaters, and other heat-generating products.

•Water and moisture-Do not use the product in or near water or in high moisture areas, such as a bathroom.

CARING FOR YOUR PRODUCT

To ensure you receive the maximum benefit from using this product, please observe the following guidelines:

•Cleaning-Use a damp cloth. Do not use liquid cleaning agents, benzene, thinner, or aerosols.

•Ventilation-The vents and other openings are designed for ventilation, and should not be blocked or covered.

•Blocking the vents can cause the product to overheat, and can damage the unit.

•Repair-Do not attempt to repair the product or modify the circuitry by yourself. Contact the retailer or a qualified repairman if the product requires servicing. Only use replacement parts that are recommended by the manufacturer.

•Do not scratch hard objects against the LCD display as this may cause damage.

5

GETTING STARTED

UNPACKING THE PRODUCT

When you unpack your clock, make sure to keep all the packing materials in a safe place, in case you need to later transport or return it for servicing.

The following items should be included in this package:

•Batteries

•Vibrating device

•User manual

BATTERIES

NOTE Please note that the batteries will be packed separately and not installed in the unit.

To load the batteries:

1.Rotate off the battery cover by turning it counter- clockwise.

2.Install the batteries by matching the correct polarity. Always use the correct battery type (2 UM - 3 AA - sized 1.5V batteries).

3.Replace the battery cover by rotating it in reverse direction (clockwise).

WARNING Reversing the polarity may damage the product.

EN

VR101 English R8 OP 5 7/15/04, 10:05 AM