Oregon Scientific WS112 user manual Battery Charging, Using the Floating Aroma Lantern

Models: WS112

1 52
Download 52 pages 7.81 Kb
Page 4
Image 4

EN

BATTERY CHARGING

Before using the Floating Aroma Lantern for the first time, charge it for at least 10 hours until the indicator LED on the body flashes.

1.Connect the adapter to the base charger with the DC plug. Then plug the adapter in to a wall socket. The LED charging indicator on the Floating Aroma Lantern will now show an red light.

2.Dock the Floating Aroma Lantern on the base charger securely, ensure the base is positioned on a flat and supportive surface. The battery charging indicator light will light up on the front of the unit.

3.Charge the Floating Aroma Lantern for 10 hours. When the charging ends the LED charging indicator light will flash.

IMPORTANT

To maintain the battery life of the Floating Aroma Lantern, it is recommended to fully charge the battery each time.

USING THE FLOATING AROMA LANTERN

1.Remove the cap of the Floating Aroma Lantern.

2.Pour a few drops of water into the essential oil holder.

3.Pour several drops of aromatic essential oil into the holder.

4.Replace the cap.

5.Float the Floating Aroma Lantern in the bath water and enjoy.

NOTE

1.Aromatic essential oil is not included with the product. Please purchase separately.

2.Make sure the Candle Light compartment unit is locked to the unit and tightly sealed off before putting into water.

3.Do not add the aromatic essential oil to the essential oil holder before adding the water; concentrated aromatic essential oil may corrode the plastic surface of the unit.

4.The effective amount of aroma essential oil will depend on the size of the bath.

5.When the Floating Aroma Lantern is in the bath, avoid vigorous movement to prevent spilling the aromatic essential oil.

6.Clean the essential oil holder under running water after use.

USE THE FLOATING AROMA LANTERN LIGHT AND HEATER

1.Press the ON / OFF button once, the candle light function turns on.

2.Press the button again, the candle light and diffuser functions turn on.

3.Press the button again, the Floating Aroma Lantern turns off.

NOTE

The Floating Aroma Lantern light and diffuser functions turn off automatically after 180 minutes.

Do not turn on the diffuser function without adding water and aromatic essential oil.

Never touch the essential oil holder when the light and diffuser functions are operating to avoid burns.

Page 4
Image 4
Oregon Scientific WS112 user manual Battery Charging, Using the Floating Aroma Lantern